| Supply voltage |
|
| Load voltage L+ |
|
| ● Rated value (DC) |
24 V |
| Input current |
|
| from backplane bus 5 V DC, max. |
120 mA |
| Power loss |
|
| Power loss, typ. |
0.6 W |
| Analog inputs |
|
| Number of analog inputs |
8; 8x thermocouples; 4x RTD thermoresistors |
| Input ranges |
|
| ● Voltage |
Yes |
| ● Current |
No |
| ● Thermocouple |
Yes |
| ● Resistance thermometer |
Yes |
| ● Resistance |
Yes |
| Input ranges (rated values), voltages |
|
| ● -1 V to +1 V |
Yes |
| — Input resistance (-1 V to +1 V) |
10 MΩ |
| ● -25 mV to +25 mV |
Yes |
| — Input resistance (-25 mV to +25 mV) |
10 MΩ |
| ● -250 mV to +250 mV |
Yes |
| — Input resistance (-250 mV to +250 mV) |
10 MΩ |
| ● -50 mV to +50 mV |
Yes |
| — Input resistance (-50 mV to +50 mV) |
10 MΩ |
| ● -500 mV to +500 mV |
Yes |
| — Input resistance (-500 mV to +500 mV) |
10 MΩ |
| ● -80 mV to +80 mV |
Yes |
| — Input resistance (-80 mV to +80 mV) |
10 MΩ |
| Input ranges (rated values), thermocouples |
|
| ● type B |
Yes |
| — Input resistance (Type B) |
10 MΩ |
| ● Type E |
Yes |
| — Input resistance (Type E) |
10 MΩ |
| ● Type J |
Yes |
| — Input resistance (type J) |
10 MΩ |
| ● Type K |
Yes |
| — Input resistance (Type K) |
10 MΩ |
| ● Type L |
Yes |
| — Input resistance (Type L) |
10 MΩ |
| ● Type N |
Yes |
| — Input resistance (Type N) |
10 MΩ |
| ● Type R |
Yes |
| — Input resistance (Type R) |
10 MΩ |
| ● Type S |
Yes |
| — Input resistance (Type S) |
10 MΩ |
| ● Type T |
Yes |
| — Input resistance (Type T) |
10 MΩ |
| ● Type U |
Yes |
| — Input resistance (Type U) |
10 MΩ |
| Input ranges (rated values), resistance thermometer |
|
| ● Ni 100 |
Yes |
| — Input resistance (Ni 100) |
10 MΩ |
| ● Pt 100 |
Yes |
| — Input resistance (Pt 100) |
10 MΩ |
| ● Pt 200 |
Yes |
| — Input resistance (Pt 200) |
10 MΩ |
| Cable length |
|
| ● shielded, max. |
200 m; TC: 50 m |
| Analog value generation for the inputs |
|
| Integration and conversion time/resolution per channel |
|
| ● Resolution with overrange (bit including sign), max. |
16 bit; 10 bit to 15 bit + sign |
| ● Integration time, parameterizable |
Yes; 2.5 to 100 ms |
| ● Interference voltage suppression for interference frequency f1 in Hz |
10 to 400 Hz |
| Encoder |
|
| Connection of signal encoders |
|
| ● for current measurement as 2-wire transducer |
Yes |
| ● for current measurement as 4-wire transducer |
Yes |
| Errors/accuracies |
|
| Operational error limit in overall temperature range |
|
| ● Resistance thermometer, relative to input range, (+/-) |
0.04 %; 0.09 to 0.04% |
| Basic error limit (operational limit at 25 °C) |
|
| ● Resistance thermometer, relative to input range, (+/-) |
0.008 %; 0.018 ... 0.008% |
| Interrupts/diagnostics/status information |
|
| Diagnostics function |
Yes |
| Diagnoses |
|
| ● Diagnostic information readable |
Yes |
| ● Overrange |
Yes |
| ● Wire-break in signal transmitter cable |
Yes |
| ● Short-circuit of the signal encoder cable |
Yes |
| Diagnostics indication LED |
|
| ● Group error SF (red) |
Yes |
| ● Channel fault indicator F (red) |
Yes |
| Ex(i) characteristics |
|
| Module for Ex(i) protection |
Yes |
| maximum values for connecting terminals for gas group IIC |
|
| ● Uo (no-load voltage), max. |
5.9 V |
| ● Io (short-circuit current), max. |
28.8 mA |
| ● Po (power output), max. |
41.4 mW |
| ● Co (permissible external capacity), max. |
43 µF |
| ● Lo (permissible external inductivity), max. |
40 mH |
| Potential separation |
|
| Potential separation analog inputs |
|
| ● between the channels |
No |
| ● between the channels and backplane bus |
Yes |
| Standards, approvals, certificates |
|
| Use in hazardous areas |
|
| ● ATEX marking |
ATEX II 3 G (2) GD Ex nA [ib Gb] [ib IIIC Db] IIC T4 Gc |
| ● FM marking |
Class I, Division 2, Group A, B, C, D T4 |
| ● Test number PTB |
Ex-96.D.2108X |
| Ambient conditions |
|
| Ambient temperature during operation |
|
| ● max. |
60 °C |
| Connection method |
|
| required front connector |
20-pin |
| Weights |
|
| Weight, approx. |
210 g |
