| General information |
|
| Product type designation |
F-AI 4xI 0(4)..20mA 2-/4-wire HF |
| Firmware version |
|
| ● FW update possible |
Yes |
| usable BaseUnits |
BU type A0, A1 |
| Color code for module-specific color-coded label |
CC00 |
| Product function |
|
| ● I&M data |
Yes; I&M0 to I&M3 |
| Engineering with |
|
| ● STEP 7 TIA Portal configurable/integrated from version |
V15 with HSP 203 |
| CiR - Configuration in RUN |
|
| Reparameterization possible in RUN |
No |
| Calibration possible in RUN |
No |
| Supply voltage |
|
| Rated value (DC) |
24 V |
| permissible range, lower limit (DC) |
19.2 V |
| permissible range, upper limit (DC) |
28.8 V |
| Reverse polarity protection |
Yes |
| power supply according to NEC Class 2 required |
No |
| Input current |
|
| Current consumption (rated value) |
0.38 A |
| Current consumption, max. |
0.4 A |
| Encoder supply |
|
| 24 V encoder supply |
|
| ● 24 V |
Yes; min. L+ (-1.5 V) |
| ● Short-circuit protection |
Yes |
| ● Output current, max. |
300 mA; total current of all encoders/channels |
| Power |
|
| Power consumption from the backplane bus |
70 mW |
| Power loss |
|
| Power loss, typ. |
2 W |
| Address area |
|
| Address space per module |
|
| ● Inputs |
14 byte; S7-300/400F CPU, 13 byte |
| ● Outputs |
5 byte; S7-300/400F CPU, 4 byte |
| Hardware configuration |
|
| Automatic encoding |
Yes |
| ● Electronic coding element type F |
Yes |
| Analog inputs |
|
| Number of analog inputs |
4 |
| ● For current measurement |
4 |
| permissible input current for current input (destruction limit), max. |
35 mA |
| Input ranges (rated values), currents |
|
| ● 0 to 20 mA |
Yes |
| — Input resistance (0 to 20 mA) |
125 Ω |
| ● 4 mA to 20 mA |
Yes |
| — Input resistance (4 mA to 20 mA) |
125 Ω |
| Cable length |
|
| ● shielded, max. |
1 000 m |
| Analog value generation for the inputs |
|
| Measurement principle |
Sigma Delta |
| Integration and conversion time/resolution per channel |
|
| ● Resolution with overrange (bit including sign), max. |
16 bit |
| ● Integration time, parameterizable |
Yes |
| ● Integration time (ms) |
20 / 16,667 |
| ● Interference voltage suppression for interference frequency f1 in Hz |
50 / 60 Hz |
| Smoothing of measured values |
|
| ● Number of smoothing levels |
7 |
| ● parameterizable |
Yes |
| ● Step: None |
Yes; 1x conversion cycle time |
| ● Step: low |
Yes; 2x / 4x conversion cycle time |
| ● Step: Medium |
Yes; 8x / 16x conversion cycle time |
| ● Step: High |
Yes; 32x / 64x conversion cycle time |
| Encoder |
|
| Connection of signal encoders |
|
| ● for current measurement as 2-wire transducer |
Yes |
| — Burden of 2-wire transmitter, max. |
650 Ω |
| ● for current measurement as 4-wire transducer |
Yes |
| Errors/accuracies |
|
| Linearity error (relative to input range), (+/-) |
0.1 % |
| Temperature error (relative to input range), (+/-) |
0.023 %/K |
| Repeat accuracy in steady state at 25 °C (relative to input range), (+/-) |
0.1 % |
| Operational error limit in overall temperature range |
|
| ● Current, relative to input range, (+/-) |
2 % |
| Basic error limit (operational limit at 25 °C) |
|
| ● Current, relative to input range, (+/-) |
0.1 % |
| Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency |
|
| ● Series mode interference (peak value of interference < rated value of input range), min. |
40 dB |
| ● Common mode interference, min. |
70 dB |
| Interrupts/diagnostics/status information |
|
| Diagnostics function |
Yes |
| Alarms |
|
| ● Diagnostic alarm |
Yes |
| ● Limit value alarm |
No |
| Diagnoses |
|
| ● Monitoring the supply voltage |
Yes |
| ● Wire break |
Yes |
| ● Short-circuit |
Yes |
| Diagnostics indication LED |
|
| ● RUN LED |
Yes; green LED |
| ● ERROR LED |
Yes; red LED |
| ● Monitoring of the supply voltage (PWR-LED) |
Yes; green PWR LED |
| ● Channel status display |
Yes; green LED |
| ● for channel diagnostics |
Yes; red LED |
| ● for module diagnostics |
Yes; green/red DIAG LED |
| Potential separation |
|
| Potential separation channels |
|
| ● between the channels |
No |
| ● between the channels and backplane bus |
Yes |
| ● between the channels and the power supply of the electronics |
Yes |
| Permissible potential difference |
|
| between the inputs (UCM) |
10 Vpp |
| Isolation |
|
| Isolation tested with |
707 V DC (type test) |
| Standards, approvals, certificates |
|
| Ecological footprint |
|
| ● environmental product declaration |
Yes |
| Global warming potential |
|
| — global warming potential, (total) [CO2 eq] |
88.3 kg |
| — global warming potential, (during production) [CO2 eq] |
13.1 kg |
| — global warming potential, (during operation) [CO2 eq] |
76.6 kg |
| — global warming potential, (after end of life cycle) [CO2 eq] |
-1.37 kg |
| Highest safety class achievable in safety mode |
|
| ● Performance level according to ISO 13849-1 |
PLe |
| ● Category according to ISO 13849-1 |
Cat. 4 |
| ● SIL acc. to IEC 61508 |
SIL 3 |
| Probability of failure (for service life of 20 years and repair time of 100 hours) |
|
| — Low demand mode: PFDavg in accordance with SIL3 |
< 5.00E-05 |
| — High demand/continuous mode: PFH in accordance with SIL3 |
< 1.00E-09 1/h |
| Ambient conditions |
|
| Ambient temperature during operation |
|
| ● horizontal installation, min. |
0 °C |
| ● horizontal installation, max. |
60 °C |
| ● vertical installation, min. |
0 °C |
| ● vertical installation, max. |
50 °C |
| Dimensions |
|
| Width |
15 mm |
| Height |
73 mm |
| Depth |
58 mm |
| Weights |
|
| Weight, approx. |
48 g |
