| General information |
|
| Product function |
|
| ● Isochronous mode |
No |
| Supply voltage |
|
| Load voltage L+ |
|
| ● Rated value (DC) |
24 V; From power module |
| ● Reverse polarity protection |
Yes |
| Input current |
|
| from load voltage L+ (without load), max. |
30 mA |
| from backplane bus 3.3 V DC, max. |
10 mA |
| Power loss |
|
| Power loss, typ. |
0.6 W |
| Address area |
|
| Address space per module |
|
| ● Address space per module, max. |
4 byte |
| Analog inputs |
|
| Number of analog inputs |
2 |
| permissible input voltage for voltage input (destruction limit), max. |
35 V; 35 V continuous; 75 V for max. 1 ms (mark to space ratio 1:20) |
| Cycle time (all channels) max. |
Number of active channels per module x basic conversion time |
| Input ranges (rated values), voltages |
|
| ● 1 V to 5 V |
Yes |
| ● -10 V to +10 V |
Yes |
| ● -5 V to +5 V |
Yes |
| Cable length |
|
| ● shielded, max. |
200 m |
| Analog value generation for the inputs |
|
| Measurement principle |
integrating |
| Integration and conversion time/resolution per channel |
|
| ● Resolution with overrange (bit including sign), max. |
14 bit; ±10 V: 13 bit + sign, ±5 V: 13 bit + sign; 1 to 5 V: 13 bit |
| ● Integration time, parameterizable |
Yes |
| ● Integration time (ms) |
16,7 / 20 ms |
| ● Interference voltage suppression for interference frequency f1 in Hz |
50 / 60 Hz |
| ● Conversion time (per channel) |
65 ms; 55 / 65 ms |
| Smoothing of measured values |
|
| ● parameterizable |
Yes; In four stages by means of digital filtering |
| ● Step: None |
Yes; 1x cycle time |
| ● Step: low |
Yes; 4x cycle time |
| ● Step: Medium |
Yes; 32x cycle time |
| ● Step: High |
Yes; 64x cycle time |
| Errors/accuracies |
|
| Operational error limit in overall temperature range |
|
| ● Voltage, relative to input range, (+/-) |
0.6 % |
| Basic error limit (operational limit at 25 °C) |
|
| ● Voltage, relative to input range, (+/-) |
0.4 % |
| Interrupts/diagnostics/status information |
|
| Diagnoses |
|
| ● Wire break |
Yes; Measuring range 1 to 5 V only |
| ● Group error |
Yes |
| ● Overflow/Underflow |
Yes |
| Diagnostics indication LED |
|
| ● Group error SF (red) |
Yes |
| Parameter |
|
| Remark |
4 byte |
| Diagnostics wire break |
Disable / enable (only in measuring range 1 to 5 V) |
| Group diagnostics |
Disable / enable |
| Overflow/Underflow |
Disable / enable |
| Potential separation |
|
| Potential separation analog inputs |
|
| ● between the channels |
No |
| ● between the channels and backplane bus |
Yes |
| ● Between the channels and load voltage L+ |
Yes |
| Isolation |
|
| Isolation tested with |
500 V DC |
| Dimensions |
|
| Width |
15 mm |
| Height |
81 mm |
| Depth |
52 mm |
| Weights |
|
| Weight, approx. |
40 g |
